Brand: TECHTONGDA
Features:
- This screen printing machine is mainly used for printing item with flat surface in cylinder or cone shape, such as bottles，mugs, pen ,rod, bucket.It is mainly used for printing cylindrical and conical products with a diameter below 3.15". The maximum height of the printing item is 5.5".
- The whole machine will remain firm and stable in the printing process. Double springs will achieve perfect tension balance when printing. The lifting angle of the screen can be easily adjusted.The spring tension on both sides should be the same, otherwise it may cause distortion of the screen frame.Easy to replace the screen frame, squeegee blade and ink recover scraper.
- This machine come with 2 screen frames. The max frame size is 11.8"*9.4". The max thickness of frame is 1.2". The printing operation is extremely smooth. Screen's sliding distance can be adjusted according to the printing need. Each size is equipped with 2 locking rings that save you from repeat adjusting.
- The height of the printing platform can be locked and adjusted precisely with a elevator. The distance of 2 holder can be adjusted within 5.5" to hold different size of items. Equipped with 3 kinds of holders that can fit different shape of item.
- This screen printing machine allow you print repeatly with same printing effect as there are 2 post can keep the printed item stay still while printing. The post will also save you from adjusting when replacing the printed item, which is very efficient.
Binding: Office Product
Details: This machine adopts the printing screen frame height positioning structure, the front part is equipped with the parallel placement plat. Printing materials and tools such as ink buckets can be placed on the back board of the main machine. Installation Methods of the Screen Plate Place the screen frame into the rear support plate from the bottom of the installation table. Move the front of the frame to the front support plate, tighten four Screws to fix the screen frame. Installation Methods of Scraping and Ink Recover Scraper Put in the scraper rubber, the lower edge of the scraper and the mesh surface will fit smoothly and smoothly. Fix the following three screws (don't tighten them); tighten the top two white knobs to fix the scraper. Push and pull handle can be installed vertically or in parallel according to the operator's needs. The machine has been fully adjusted before leaving the factory. The customer only needs to install the spring and screen frame landing board for use.The main body of the machine uses advanced electrostatic spraying metal surface treatment, acid and alkali resistance, corrosion resistance, clean resistance, no rust, can be used for a long time; Some parts are made of stainless steel and aluminum alloy. Item include:3.15" Cylinder Screen Printing Machine Cylindrical Silk Screen Printing Press(006595)